Amerec AK Series 7.5kW Steam Shower Generator 240V
The Amerec AK-Series 7.5kW steam shower generator is engineered for steam baths up to 200 adjusted cubic feet (ACF). Required control package sold separately. AK steam shower generators includes a stainless-steel tank, industrial-grade heating elements, modular snap-in control connections, durable electronics, an electronic water level control system, and several other innovative features. Available in either 240V/1PH or 208V/3PH configurations. The Amerec AK7.5 steam bath generator carries a limited lifetime warranty and is fully serviceable. This compact steam shower unit installs conveniently out of sight in cabinets, closets, vanities, and other similar locations. Amerec steam shower generators are ETL listed to ensure your safety and peace-of-mind.
Features
- Stainless Steel Tank
- Industrial grade, serviceable heating elements
- Electronic Water-Level Control System
- Low Voltage safety control circuits
- Ability to field wire phase
- Ability to connect multiple generators to heat steam baths larger than 550 C.F.
- Operates with inside/outside shower, on/off, time/temperature controls
- ASME Safety Valve
- UL/CSA/CE Listed
- Full 3/4" port drain valve
Includes
- 7.5KW steam bath generator
- Installation and operation manual
- Limited warranty
Specifications
- Minimum Adjusted Cubic Feet: 80
- Maximum Adjusted Cubic Feet: 200
- Kilowatt Rating (KW): 7.5 KW
- AC Voltage: 240V AC
- DC Voltage: 5V DC
- Phase: Single Phase
- Nominal Amperage: 31 Amps
- Recommended Protective Device: 40 Amp
- Recommended Minimum Copper Wire Supply: 8 AWG
- Water Supply Connection: 3/8" NPT
- Generator Steam Line Connection: 1/2" NPT
- Steam Head Connection: 1/2" NPT
- Drain Connection: 3/4" NPT
- Safety Relief Valve Connection: 3/4" NPT
- Safety Relief Valve PSIG: 10 PSIG
- Control "Rough In" Cut Out: 2-3/8" Diameter
- Control Sensor Cable: 25', 2 Conductor, 22 AWG, Shielded Cable
- Control Sensor "Rough In" Cut Out: 7/8" Diameter
- Generator Control Connection: 8 Pin, Snap-In Connector
- Generator Control Cable: 25', 8 Conductor, 28 AWG, Shielded Cable
- Width In Inches: 16-1/2"
- Depth In Inches: 6-1/4"
- Height In Inches: 15"
Required control package sold separately.