Commercial Steam Parts

Mr. Steam High Limit Control For Commercial Generators The CU High Limit Device is for use with any CT Day Spa or CU Commercial Steam Generator Sy...

Mr. Steam Commercial AromaTherapy Pump AromaSteam System evenly infuses essential oils into the steam environment via an electronic oil delivery s...

Mr. Steam AlarmSystem For Commercial Generators The CU Alarm is an audible alarm that sounds in the event that the steam room maximum set temperat...

Mr. Steam CT 12 kW Generator of 240 Volt & 1-Phase CU Series Commercial Generators meet rigid requirements and nationally recognized testing s...

Mr. Steam 8-hole Head Gasket This Head Gasket is used on the Mechanical Low Water Cutoff and Feeder MM150 on Mr. Steam’s Commercial CU model steam...

Mr. Steam Float Rod & Ball Assembly The Float Rod and Ball Assembly is part of the Mechanical Low Water Cutoff and Feeder head assembly. The F...

Mr. Steam Tempo Room Temperature Sensor with Integral 60ft Cable Mr.Steam Temperature Room Sensor with 60 ft Cable is designed for Tempo, eTempo, ...

Mr. Steam 1/4" Pigtail 180 Degree Brass The Pigtail 1/4” NPT 180-degree made of copper is used as part of the pressure control system to prevent s...

Mr. Steam AromaFlo Hose Hose (sold per foot), AromaFlo, Steam Bath Part, Mr. Steam Used with the Mr. Steam Aromaflo commercial oil injection syste...

Mr. Steam CU Steam Emergency Stop Switch This CU SteamStop emergency stop switch electronically shuts down the steam generator and initiates the D...

Mr. Steam 30-Minute Mechanical Timer with Plate Recommended for low volume use of steam rooms. Works in conjunction with the Digital 1 control pac...

Mr. Steam Digital 1 Plus Field Kit 240V The D1 Plus Digital Control maintains the steam room operating temperature as well as having a built-in hi...

Mr. Steam Digital 1 Plus Field Kit 120V The D1 Plus Digital Control maintains the steam room operating temperature as well as having a built-in hi...

Mr. Steam eTempo On/Off Neutral Finish For larger steam rooms, consider a second CU AromaSteam steam head for enhanced steam/heat disbursement. In...

Mr. Steam Control Press 15PSI Manual Reset This Hi-Limit Control with Manual Reset 15PSIG is required as a safety pressure control. If the tank ve...

Mr. Steam 1/4" x 9" Stainless Low-Water Probe This Low Water Probe is required for appropriate water fill operation on Mr. Steam’s Commercial CU m...

Mr. Steam Zinc Bolt This zinc-plated bolt is for use with heating elements on Mr.Steam's Commercial CU model steam bath generators. NOTE: To prese...

Mr. Steam 18" Wire Element #6 with Terminal Mr. Steam 99524-6T  Wire, Insulated, Heat Resistant, 18", #6 AWG w/ Terminal, CU Series  This Heating ...

Mr. Steam Valve Safety 15PSI 3/4" This 15 PSIG Safety Valve 1" outlet is required as a safety pressure control on Mr. Steam's Residential Commerci...

Mr. Steam Steam Solenoid 120V 3/4" CU Series Mr.Steam 99286A SOLENOID STEAM 120V 3/4'' CU SERIES NOTE: To preserve the originality, operation, and...

Mr. Steam Steam Solenoid 240V 1/2" CU Series This Low Pressure Steam 240V 1/2” solenoid is required for steam room operation on Mr. Steam’s Commer...

Mr. Steam Steam Solenoid 120V 1/2" CU Series This Low Pressure Steam 120V 1” solenoid is required for steam room operation on Mr. Steam’s Commerci...

Mr. Steam O-Ring Viton for Sight Glass O-Ring, Gauge Glass, Viton NOTE: To preserve the originality, operation, and safety of replacement parts, t...

Mr. Steam Valve Set For Gauge Glass CU Series This Gauge Glass Valve Set is required and houses the Sight Gauge Glass assembly on Mr. Steam’s Comm...